Hjem › Nøgleord › Hotfix

Fejl ved bogføring af læg-på-lager i Navision 5.0

Submitted by Elizabeth, created 22/10/2009 - 14:07, updated 09/04/2010 - 13:22
DKK 100,00
Uventet opretter Microsoft Dynamics NAV 5.0 en regulerings postering når man bogfører en læg-på-lager.
 
Symptoms
When you post a put-away in Microsoft Dynamics NAV 5.0, Microsoft Dynamics NAV 5.0 unexpectedly creates an adjustment transaction. Additionally, in the warehouse entry, the Qty. Base value differs from the Quantity value even if the Unit of Measure value is same.

Cause
This problem occurs because Microsoft Dynamics NAV 5.0 incorrectly calculates the quantity that will put into the fixed bin. The sequence to put away the items calculates the quantity and the base quantity separately.

Resolution

Hotfix information
A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 5.0 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.
 
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
 

Installation information og download

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
• The Modify permission for the object that you will be changing.
• The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.

Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Prerequisites
No prerequisites are required to apply this hotfix.

Removal information
You cannot remove this hotfix.

Status

 

APPLIES TO
• Microsoft Dynamics NAV 5.0

 
Download hotfix

 
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To apply this hotfix, follow these steps:
1. Change the code in the CalcQtyBase procedure in the Bin Content table (7302) as follows.
Existing code
...
WhseActivLine.SETRANGE("Variant Code","Variant Code");
WhseActivLine.SETRANGE("Unit of Measure Code","Unit of Measure Code");
COPYFILTER("Lot No. Filter",WhseActivLine."Lot No.");
...
 
Replacement code
...
WhseActivLine.SETRANGE("Variant Code","Variant Code");
WhseActivLine.SETRANGE("Unit of Measure Code","Unit of Measure Code");
// Add the following line.
WhseActivLine.SETRANGE("Action Type",WhseActivLine."Action Type"::Place);  
COPYFILTER("Lot No. Filter",WhseActivLine."Lot No.");
...
2. Change the code in the Code procedure in the Create Put-away codeunit (7313) as follows.
Existing code
...
              IF (NOT PutAwayTemplLine."Find Bin w. Less than Min. Qty" OR
                  (BinContentQty < BinContent."Min. Qty.")) AND
                 (NOT PutAwayTemplLine."Find Empty Bin" OR (BinContentQty <= 0))
// Delete the following lines.
                IF (BinContent."Max. Qty." <> 0) AND (BinContent."Max. Qty." >= BinContentQty) THEN BEGIN
                  QtyToPutAway := BinContent."Max. Qty." - BinContentQty;
                  IF QtyToPutAway > RemQtyToPutAway THEN
                    QtyToPutAway := RemQtyToPutAway;
                END;
                IF (BinContent."Max. Qty." <> 0) AND
                   (BinContent."Max. Qty." * BinContent."Qty. per Unit of Measure" >= BinContentQty)
                THEN BEGIN
                  QtyToPutAwayBase :=
                    BinContent."Max. Qty." * BinContent."Qty. per Unit of Measure" - BinContentQtyBase;
                  IF QtyToPutAwayBase > RemQtyToPutAwayBase THEN
                    QtyToPutAwayBase := RemQtyToPutAwayBase;
                END;
                GetBin("Location Code",BinContent."Bin Code");
                CalcQtyToPutAway(FALSE,FALSE);
...
 
Replacement code
...
              IF (NOT PutAwayTemplLine."Find Bin w. Less than Min. Qty" OR
                  (BinContentQty < BinContent."Min. Qty.")) AND
                 (NOT PutAwayTemplLine."Find Empty Bin" OR (BinContentQty <= 0))
// Add the following lines.
              THEN BEGIN
                IF (BinContent."Max. Qty." <> 0) AND       
                   (BinContent."Max. Qty." * BinContent."Qty. per Unit of Measure" >=   
                   BinContentQty * BinContent."Qty. per Unit of Measure")    
                THEN BEGIN          
                  QtyToPutAwayBase :=        
                    BinContent."Max. Qty." * BinContent."Qty. per Unit of Measure" - BinContentQtyBase;  
                  QtyToPutAway := QtyToPutAwayBase / PutAwayItemUOM."Qty. per Unit of Measure";
                  IF QtyToPutAwayBase > RemQtyToPutAwayBase THEN    
                    QtyToPutAwayBase := RemQtyToPutAwayBase;     
                  IF QtyToPutAway > RemQtyToPutAway THEN      
                    QtyToPutAway := RemQtyToPutAway;      
                END;           
                GetBin("Location Code",BinContent."Bin Code");
                CalcQtyToPutAway(FALSE,FALSE);
...
 
Version: 
Nøgleord: